Licensed & Insured, in Santa Clarita and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Santa Clarita
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (661) 495-2239 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Santa Clarita and surrounding areas · On-site visits included · Free estimate within 24h
Santa Clarita Metal Roofing is a team of local certified professionals based in Santa Clarita. We respond quickly in Santa Clarita and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (661) 495-2239⭐⭐⭐⭐⭐ 4.9/5 · 273 verified Google reviews
“Had them put a corrugated metal roof on my backyard shed, about 120 square feet. They finished it in a day and a half and even swept up all the metal shavings afterward. I was honestly expecting a mess and there wasn't any.”
Corrugated & Ribbed Panel Roofing
“We wanted a copper awning over the front entry and these guys nailed it. The seams are clean, the patina is already starting to look amazing, and they walked me through the whole flashing detail so it wouldn't leak against the stucco. Really pleased with how it turned out.”
Copper & Specialty Metal Roofing
“Needed a metal roof on our ag barn out in the rural part of Acton and they handled the whole thing, panels, trim, the works. Crew of four knocked it out in three days. Only reason I'm not giving five stars is they showed up a couple hours late on day one, but the roof itself is solid.”
Commercial & Agricultural Metal Roofing
“Standing seam on our two-story house, roughly 2,800 square feet. From tear-off to final cleanup it was about a week and a half, and the crew kept the yard spotless every single evening. Couldn't be happier with how it looks.”
Standing Seam Metal Roofing
“We had a leak coming in around the chimney and the vent pipe every time it rained hard. They re-flashed the chimney, resealed the vent penetration, and fixed a couple of loose screws while they were up there. Two months of storms since and bone dry.”
Chimney & Skylight Repair
“New metal roof on our house and the difference is night and day from the old one. They replaced everything down to the panels, hauled off all the old material, and my wife says the house even sounds quieter when it rains. Great crew, straight answers on the quote.”
Metal Roof Installation
“We did a metal roof over our existing shingles up in the hills and I was nervous about it, but they explained the retrofit process clearly and it saved us a ton of money versus a full tear-off. The panels went on clean and they added snow guards since we get ice up here in winter. Really relieved we went with them.”
Metal Roof Over Shingles (Retrofit)
“Replaced our old tile roof with a stone-coated steel one and it looks fantastic, kept the same look as the neighborhood but way more durable. Whole job took about two weeks and they left the property cleaner than they found it. Small thing: scheduling the inspection took a few extra days, but worth the wait.”
Metal Roof ReplacementReal photos of our work in Santa Clarita · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener panel install | Starting at $8/sq ft | Includes panels, fasteners, and basic trim; price rises with pitch and tear-off. |
| Standing seam install | Starting at $14/sq ft | Concealed clips, high-temp underlayment, and custom flashing included; complexity moves it up. |
| Stone-coated steel install | Starting at $12/sq ft | Includes panel system and ridge trim; HOA color specs and roof cuts add cost. |
| Tear-off and disposal | From $2/sq ft | Removal of existing tile or shingle layers plus dump fees; layer count drives the total. |
| Complex or large-scale job | On estimate | Steep pitches, multiple skylights, chimney flashing, and deck repair need an on-site look. |
| Estimate | Free | On-site assessment and written quote within 24 hours at (661) 495-2239, no obligation. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Snap-lock standing seam, tear-off included | Starting at $10/sq ft | Includes tear-off, high-temp underlayment, and concealed clips on a standard-pitch roof. |
| Mechanically seamed standing seam | Starting at $13/sq ft | Includes powered double-lock seaming and formed metal flashing at all penetrations. |
| Standing seam over existing shingles | Starting at $11/sq ft | Includes battens and panels over a sound existing roof, with tear-off avoided. |
| Complex or large-scale roof | On estimate | Multiple hips, valleys, skylights, or steep pitch need an on-site measurement first. |
| Travel | Included | In Santa Clarita and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (661) 495-2239, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard shingle tear-off and metal replacement | Starting at $9/sq ft | Includes tear-off, haul-away, decking inspection and new metal system; pitch and access move the rate |
| Concrete tile tear-off and metal replacement | Starting at $12/sq ft | Covers heavy tile removal and disposal; adds labor and hauling cost versus shingle tear-off |
| Premium standing seam or specialty metal | Starting at $15/sq ft | Concealed fasteners and premium finishes; steeper roofs and complex flashing push the number up |
| Complex or large-scale job | On estimate | Multiple valleys, skylights, chimneys and decking repair require an on-site look before pricing |
| Travel | Included | In Santa Clarita and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (661) 495-2239, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic retrofit, exposed fastener panel | Starting at $7/sq ft | Includes battens, underlayment, and panel install over one layer of shingles on a simple roof. |
| Stone-coated steel retrofit | Starting at $10/sq ft | Textured steel panels over battens, priced higher for material and detail work on hips and valleys. |
| Standing seam retrofit | Starting at $13/sq ft | Concealed-fastener panels over battens, with premium for wind uplift and clean vertical lines. |
| Complex or large-scale job | On estimate | Two-story homes, steep pitch, multiple valleys, or deck repair need an on-site look before pricing. |
| Travel | Included | in Santa Clarita and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (661) 495-2239, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (reseal, screws, small flashing) | Starting at $450 | Includes service call, inspection and a straightforward fix; scope and roof height move the price. |
| Panel replacement (one to three panels) | Starting at $650 | Includes matching panel, fasteners and reseal; pitch and access on two-story homes add cost. |
| Field re-fastening on exposed-fastener roof | On estimate | Priced by roof square footage and fastener count; needs an on-site look before quoting. |
| Storm damage repair with documentation | On estimate | Depends on damage extent and urgency; we photograph and document for your insurance file. |
| Travel | Included | In Santa Clarita and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (661) 495-2239, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single-source leak repair | Starting at $450 | Includes diagnosis, fastener or boot replacement, and water test on one confirmed leak point. |
| Flashing or seam repair | Starting at $650 | Covers rebuilding wall, chimney, or skylight flashing and resetting seams with new sealant. |
| Multi-point or steep-access repair | On estimate | Priced after inspection because roof pitch, height, and number of leak points drive labor. |
| Emergency tarping | Starting at $350 | Temporary waterproof cover for active leaks, with repair credited toward the full job. |
| Travel | Included | in Santa Clarita and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (661) 495-2239, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Spot re-fastening (single slope) | Starting at $750 | Covers replacing backed-out screws and washers on one slope, priced by fastener count and pitch |
| Full-slope re-fastening | Starting at $1,450 | Replaces every fastener on a sun-baked slope with oversized screws and UV-resistant washers |
| Barn or outbuilding re-fastening | Starting at $1,100 | Long corrugated runs on Agua Dulce and Acton properties, priced by linear footage and access |
| Complex or large-scale job | On estimate | Multi-slope roofs with panel damage or decking leaks need an on-site look before pricing |
| Travel | Included | In Santa Clarita and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (661) 495-2239, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof, simple outbuilding | Starting at $5.50/sq ft | Includes panels, screws, eave and ridge trim on a straightforward single-slope structure with easy access. |
| R-panel roof, workshop or garage | Starting at $6.75/sq ft | Includes R-panel, closures and flashing; price rises with pitch, height, and any purlin or framing repair. |
| Retrofit over existing roof | Starting at $7.50/sq ft | Includes new purlins or framing over the old surface and panels; tear-off and deck repair add to the total. |
| Complex or large-scale agricultural job | On estimate | Barns, multi-building ranches and steep or high-access structures need an on-site look before a number is given. |
| Travel | Included | In Santa Clarita and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (661) 495-2239, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof installation, standard profile | Starting at $9/sq ft | Includes tear-off of one layer, underlayment, panels and standard flashing; pitch and access move the price. |
| Metal shingle roof replacement with deck repair | Starting at $11/sq ft | Includes deck inspection and replacement of soft sheathing; the amount of rot found drives the final number. |
| Metal shingle retrofit over existing shingles | Starting at $8/sq ft | Includes preparation of the existing roof and new underlayment; code limits on existing layers can change scope. |
| Complex or large-scale roof | On estimate | Steep pitch, many valleys, skylights or tile removal need an on-site look before we quote. |
| Travel | Included | In Santa Clarita and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (661) 495-2239, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel, standard profile | Starting at $9/sq ft | Includes tear-off of one layer, underlayment, panels, and standard flashing on a simple gable roof |
| Spanish tile or shake profile | Starting at $11/sq ft | Premium textured profiles cost more per panel and take longer to set and align |
| Retrofit over existing shingles | Starting at $8/sq ft | Skips full tear-off and disposal, but requires a sound deck and code-approved existing layer count |
| Complex roof (valleys, dormers, skylights) | On estimate | Cut-up roofs need more flashing, more cutting, and more labor, so we price after an on-site measure |
| Travel | Included | In Santa Clarita and surrounding valley communities, with no separate call-out or mileage fee |
| Estimate | Free | Response within 24 hours at (661) 495-2239, with no obligation to book the job |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accent roof (porch, bay window) | Starting at $20/sq ft | Includes custom fabrication and soldered flat-lock seams; small square footage raises the per-foot rate |
| Full zinc or aluminum architectural roof | Starting at $28/sq ft | Includes underlayment, panels, and standard flashing; roof pitch and complexity move the price |
| Full copper standing seam roof | Starting at $38/sq ft | Includes panel fabrication, hidden fasteners, and custom trim; two-story access adds labor |
| Custom flashing and trim package | On estimate | Priced per piece after we measure chimneys, valleys, and wall transitions on site |
| Travel | Included | in Santa Clarita and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (661) 495-2239, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Reflective coating, single-story roof | Starting at $2.50/sq ft | Includes wash, rust spot treatment, and one reflective topcoat on accessible panels |
| Full restoration with color topcoat | Starting at $3.25/sq ft | Adds primer, fastener replacement, and two-coat factory-match finish |
| Two-story or steep-pitch roof | Starting at $3.75/sq ft | Higher rate reflects scaffolding, harness setup, and slower production on steep sections |
| Barn, shop, or acreage outbuilding | On estimate | Panel condition and rust severity vary too much to quote without a site visit |
| Estimate | Free | Response within 24 hours at (661) 495-2239, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single penetration re-flash | Starting at $600 | Covers inspection, removal of failed flashing and new custom-bent metal at one chimney, skylight or vent. |
| Chimney cricket rebuild | Starting at $950 | Includes new sloped diversion and counter-flashing, with price rising for wide chimneys and limited attic access. |
| Skylight curb reset and re-flash | Starting at $850 | Old sealant removed, curb checked, new flashing and cap fitted, with cost moving up on steep or high roofs. |
| Multi-penetration package | On estimate | Several flashings repaired in one visit, priced after an on-site look at roof access and extent of damage. |
| Travel | Included | In Santa Clarita and surrounding areas, with no separate call-out or mileage fee added. |
| Estimate | Free | Response within 24 hours at (661) 495-2239, with no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Snow guard row, single-story roof | Starting at $1,200 | Includes one guard row, seam clamps and edge closure check on an accessible single-story panel run. |
| Snow guards plus edge and ridge closures | Starting at $1,850 | Adds tight closures and re-sealing at eaves and ridge, common on wildfire-exposed homes. |
| Two-story or steep-pitch installation | Starting at $2,400 | Higher access, lift rental and longer panel runs push the price above the single-story rate. |
| Barn, shop or agricultural panel roof | On estimate | Exposed-fastener panels vary widely in rib spacing, so we need an on-site look first. |
| Travel | Included | In Santa Clarita and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (661) 495-2239, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Roof inspection and damage assessment | Free | Full roof walk, photo documentation, and written repair-versus-replace assessment with no obligation |
| Minor repair (re-fastening, sealant, small flashing) | Starting at $350 | Covers backed-out screws, worn washers, and small flashing repairs on one slope |
| Panel replacement (per section) | Starting at $650 | Removing and replacing wind-torn or hail-dented panels, with access and roof pitch affecting price |
| Insurance documentation package | Included with repair | Photo set and written scope prepared for your claim, provided as documentation only |
| Large or multi-slope storm damage | On estimate | Widespread damage needs an on-site look before a number is given |
| Estimate and travel | Free, included | Response within 24 hours at (661) 495-2239, no call-out or mileage fee in Santa Clarita |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard residential metal roof inspection | Free estimate | Covers full roof walk, fastener check, seam and flashing review, and a written photo report. |
| Steep or two-story roof inspection | Starting at $250 | Includes harness access and anchor setup for steep standing seam roofs on two-story homes. |
| Large or complex property inspection | On estimate | Ranch and custom homes with multiple roof sections need an on-site look before pricing. |
| Insurance documentation inspection | Starting at $300 | Photo report formatted for adjusters after wind, hail, or fire-adjacent events. |
| Travel | Included | In Santa Clarita and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (661) 495-2239, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard seamless aluminum gutter | Starting at $9/linear ft | Includes on-site forming, standard hangers, and downspouts for single-story metal roofs with clear access. |
| Oversized or steel gutter for high runoff | Starting at $14/linear ft | Larger capacity and heavier hangers for steep pitches, corrugated panels, and properties with heavy oak canopy. |
| Debris guard installation | Starting at $4/linear ft | Micro-mesh or stainless guard sized to the leaf type, priced separately from the gutter run. |
| Complex or large-scale job | On estimate | Steep lots, multi-story fascia, long runs, and tight side yards need an on-site look before pricing. |
| Travel | Included | In Santa Clarita and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (661) 495-2239, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Barn, workshop or carport roof | Free estimate | Covers panel measurement, purlin check and a written scope; access and square footage move the final rate |
| Exposed fastener panel install | Starting at $4.50 per sq ft | Includes underlayment, ribbed panels and trim; gauge and insulation add to the total |
| Standing seam commercial roof | Starting at $9.00 per sq ft | Concealed clips and raised seams; building height and flashing count drive the price |
| Retrofit over existing deck | On estimate | Needs an on-site look at deck condition, hat channel layout and how the building stays occupied |
| Repair and screw re-fastening | On estimate | Priced after we count failed fasteners, rusted washers and leaking penetrations |
| Travel | Included | In Santa Clarita and the surrounding valley, with no separate call-out or mileage fee |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
When homeowners searching for a metal roofing contractor near me in Santa Clarita need straight answers instead of a sales pitch, Santa Clarita Metal Roofing is the local team to call. We handle metal roof installation, replacement, re-roofs, and repairs on homes across the valley, from the older ranch properties in Newhall and Saugus to the stucco two-story tracts in Valencia, Canyon Country, and Stevenson Ranch. Out toward Castaic, Val Verde, and Agua Dulce, where lots are larger and the wind hits harder, we work on custom homes, horse properties, and outbuildings that need roofing systems built for the actual conditions here.
This valley is hard on roofs. Summers bring strong UV and months of dry heat, Santa Ana wind events test every fastener and seam, and wildfire embers land on and under roof edges. Add the large stock of aging exposed-fastener roofs on workshops, barns, and older homes, and you get a service area where knowing the local building stock matters as much as knowing metal. Our network of licensed, insured local contractors understands the difference between a repair that buys time and a replacement that actually solves the problem. To schedule an inspection or a free estimate, call (661) 495-2239.
Most metal roof leaks we see in Santa Clarita start at the fasteners. On exposed-fastener roofs that are 15 to 30 years old, the EPDM sealing washers under each screw dry out, shrink, and crack, and once that seal fails, water finds its way in at every backed-out screw. Seam separation is the next common culprit: panels expand and contract with the valley's temperature swings, and over time the seams can open just enough to let water track underneath. Failed pipe boots, flashing gaps at chimneys and skylights, and valley details that were never quite right round out the list. Wind-lifted panels after a Santa Ana event and punctures from fallen limbs are the more visible failures, but they cause the same result.
What makes a small leak worth fixing quickly is where the water goes. It rarely drips straight down. It tracks along purlins and decking, sometimes traveling several feet from the entry point before showing up as a stain on your ceiling. By the time you see it, the sheathing underneath may already be softening and the insulation above may be soaked. Left alone, a minor fastener leak becomes a decking repair, and a decking repair becomes a much larger project.
The honest call between repair and replacement depends on the condition of the panels, the deck, and the underlayment. On many older screw-down roofs, a full screw replacement with new sealing washers and proper re-fastening restores a watertight roof for a fraction of what replacement costs. When the panels themselves are sound but the fasteners are tired, that is usually the right move. When the deck is soft or the underlayment is shot, we will tell you so plainly. For active leaks, call (661) 495-2239 and we will schedule a metal roof leak repair inspection, or reach out through our contact page to get on the schedule.
We install the full range of metal systems, and we match the system to the home rather than the other way around. Standing Seam Metal Roofing uses concealed clips and hidden fasteners, which makes it the premium choice for a clean look and long-term peace of mind. Corrugated & Ribbed Panel Roofing is the economical workhorse for barns, workshops, and shelters, and it holds up well when installed correctly. We also install Metal Shingle Roofing and Stone-Coated Steel Roofing where a more traditional look is wanted, plus Copper & Specialty Metal Roofing for accents and custom details.
Here is the honest comparison: standing seam costs more up front and has no exposed screws to maintain, while screw-down costs less and needs its fasteners serviced over the life of the roof. Neither is wrong. It depends on your budget and how long you plan to stay. On the installation side, Metal Roof Over Shingles (Retrofit) is a legitimate option when the existing deck is sound, and a full tear-off is the right call when it is not. We will walk the roof and tell you which applies.
Metal roof pricing in Santa Clarita is typically quoted per square foot for installations, while repairs are often flat-rate depending on the scope. The variables that move the number most are the panel system and metal gauge, roof pitch and complexity, whether we tear off the old roof or recover over it, the condition of the decking, and access to the roof and work areas. Typical ranges exist, but final pricing depends on the roof and site conditions, and we do not quote firm numbers until we have seen the property.
It is also worth asking your insurer whether metal or impact-rated roofing qualifies for a premium discount. Some carriers offer them, though it is never a guarantee. For a clearer picture of how systems compare, visit our pricing page, and when you are ready, request a free estimate or a free roof inspection so we can give you real numbers for your home.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. What we can do is give you an honest assessment of the damage and a clear record of what we found.
On permits, the process is informational and varies by jurisdiction. In most jurisdictions, a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and thresholds, fees, and inspection requirements are set locally. Historic district or HOA design review can also affect panel profile and color choices. Requirements vary, so always verify with the Santa Clarita building or planning department before starting your project. If you have questions about the process, contact us and we will point you in the right direction.
Ready to get started? Santa Clarita Metal Roofing serves in Santa Clarita and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Santa Clarita · Response within 24h · No commitment · ☎ (661) 495-2239
Your Free Quote Request