Serving the Santa Clarita area  ·  (661) 495-2239  ·  Open Mon-Sun 7am-7pm
📞 (661) 495-2239 Free Quote

Metal Roofing in Calabasas, CA (91302) · Local Professionals

Santa Clarita Metal Roofing · Fast response in Calabasas and the Santa Clarita area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+273Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Calabasas is a city of hillside estates and gated communities tucked into the Santa Monica Mountains, where winding roads like Mulholland Highway and Las Virgenes Road lead to homes with expansive views and steep, fire-conscious terrain. The housing stock here ranges from 1980s Mediterranean-style stucco homes with concrete tile roofs to newer custom builds with standing seam and copper accents. Lots are often irregular and sloped, and the hot, dry summers and Santa Ana winds make roof performance a real concern.

Homeowners in Calabasas (91302) call Santa Clarita Metal Roofing because we understand the specific demands of this area: wildfire ember protection, hillside wind uplift, and the need for roofing systems that hold up under intense UV. Whether you are near the Calabasas Civic Center or up in the gated enclaves off Parkway Calabasas, we bring metal roofing expertise directly to your property.

Metal Roofing in Calabasas (91302)

Calabasas properties present unique challenges: steep driveways and tight access for material delivery, hillside grades that require careful staging, and drainage patterns that can channel water toward foundations if not handled correctly. Many homes have concrete tile roofs that are reaching the end of their lifespan, and homeowners are switching to standing seam or stone-coated steel for fire resistance and energy efficiency. The local terrain also means wind exposure is higher on ridge lines, so proper fastening and panel attachment are critical.

Our team has worked throughout the Santa Clarita Valley and surrounding areas, including Calabasas, and we know the local building department requirements and HOA design review processes. We are fully insured with general liability and workers' compensation, and we approach every project with the same attention to detail, whether it is a simple repair or a full replacement.

Our services in Calabasas

How a Job Works in Calabasas

Step 1: You call us at (661) 495-2239 or request a free estimate online. We schedule an on-site assessment at your convenience, where we inspect your current roof, discuss your goals, and provide a detailed written estimate. We also help document any storm damage for insurance claims if needed.

Step 2: Once you approve the estimate, we handle the permitting process with the City of Calabasas and coordinate with your HOA if applicable. Our crew arrives with materials and equipment suited for your property's access, and we take care to protect landscaping and neighboring properties. For hillside homes, we use specialized staging and safety measures.

Step 3: After installation, we conduct a thorough cleanup, including magnetic sweeps for nails and debris removal. We walk you through the finished work, ensure you are satisfied, and provide care instructions. We leave your property clean and your roof ready to protect your home for decades.

Metal roofing costs in Calabasas vary based on the material, roof complexity, and access. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. For repairs, metal roof leak repair starts at $450, and screw replacement and re-fastening starts at $750. Stone-coated steel and metal shingle roofing start at $9 per square foot, while copper and specialty metal roofing start at $20 per square foot. These figures are starting points; your actual quote will depend on the size of your roof, the condition of the existing structure, and any special requirements like HOA approvals or difficult access. Call us at (661) 495-2239 for a free, no-obligation estimate tailored to your Calabasas home.

My Calabasas home is on a steep hillside with limited access. Can you still install a metal roof?
Yes, we regularly work on hillside properties in Calabasas. We assess access during the estimate and plan for material delivery and staging using specialized equipment. Our crew is trained to work safely on steep grades and tight lots, and we take measures to protect your landscaping and prevent debris from rolling downhill.
How quickly can you respond to storm damage in Calabasas?
We offer free inspections for storm and wind damage and prioritize emergency calls. After a Santa Ana wind event or winter storm, call us at (661) 495-2239, and we will schedule an inspection as soon as possible. We can provide temporary leak mitigation if needed and help document damage for your insurance claim.
What is the typical cost for a metal roof repair in Calabasas?
Metal roof repairs in Calabasas start at $450 for leak repairs and $750 for screw replacement and re-fastening. The final cost depends on the extent of the damage, roof accessibility, and whether additional materials are needed. We provide a written estimate before any work begins.
Do I need a permit for a metal roof installation in Calabasas?
Yes, roofing permits are generally required for full replacements and some repairs in Calabasas. The City of Calabasas Building Department oversees permitting, and requirements can vary based on the scope of work and your property's location (especially in historic or HOA areas). We handle the permitting process for you to ensure compliance.
My HOA has strict design guidelines. Can you help with approval for a metal roof?
Absolutely. We are familiar with HOA design review processes in Calabasas and can provide material samples, color charts, and specifications to submit for approval. We recommend getting HOA approval before finalizing your material choice, and we can coordinate with your HOA to streamline the process.
Are you fully insured for work at my Calabasas property?
Yes, Santa Clarita Metal Roofing is fully insured with general liability and workers' compensation coverage.
How often should I have my metal roof inspected in Calabasas?
We recommend an annual inspection, especially before the winter rainy season and after major wind events. Calabasas's hot, dry summers and Santa Ana winds can loosen fasteners and stress seams. A yearly check helps catch small issues before they become leaks. We offer free estimates for inspections.
Why choose us?

Trusted professionals in Santa Clarita

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Santa Clarita

All your work handled by qualified professionals in Santa Clarita

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

273+ Verified Client Reviews in Santa Clarita

⭐⭐⭐⭐⭐ 4.9/5 · 273 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Santa Clarita · Response within 24h · No commitment · ☎ (661) 495-2239

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Santa Clarita ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm