Serving the Santa Clarita area  ·  (661) 495-2239  ·  Open Mon-Sun 7am-7pm
📞 (661) 495-2239 Free Quote

Metal Roofing in Fillmore, CA (93015) · Local Professionals

Santa Clarita Metal Roofing · Fast response in Fillmore and the Santa Clarita area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+273Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Fillmore is a small town with a big agricultural heart, where historic downtown storefronts along Central Avenue sit a few blocks from citrus groves and older ranch-style homes. The housing stock here ranges from early-1900s Victorians and Craftsman bungalows near the railroad tracks to mid-century ranch homes and newer stucco tract houses on the edges of town. Lots tend to be generous, often with mature trees and detached garages, and the flat valley floor means drainage and wind exposure are real considerations.

Homeowners in Fillmore (93015) call Santa Clarita Metal Roofing because we understand the local conditions: hot, dry summers with intense UV, Santa Ana winds that can lift panels, and winter rains that find every flashing gap. Whether you are near the Fillmore & Western Railway or off Highway 126, we bring metal roofing expertise to your doorstep.

Metal Roofing in Fillmore (93015)

Fillmore sits in the Santa Clara River Valley, surrounded by orange and avocado groves and the foothills of the Topatopa Mountains. The terrain is mostly flat, but older neighborhoods have narrow streets, mature landscaping, and tight lot access that can complicate material delivery and staging. Many homes have composition shingle or concrete tile roofs that are reaching the end of their service life, and the intense summer heat takes a toll on asphalt. Metal roofing is a smart upgrade here because it reflects heat, resists fire, and stands up to the occasional strong wind events that funnel through the valley. We also see a lot of historic properties downtown where homeowners want the look of copper or standing seam to match the character of the neighborhood.

Our team has worked throughout the Santa Clarita Valley and surrounding areas, including Fillmore, Piru, and Santa Paula. We know the local building department requirements and can help you navigate the permitting process for a reroof or new installation.

Our services in Fillmore

How a Job Works in Fillmore

Step 1: We start with a free on-site assessment. You call us at (661) 495-2239, and we schedule a time to inspect your roof, discuss your goals, and take measurements. We will check the condition of your existing roof, look for any signs of leaks or damage, and talk through options like metal roof replacement, a retrofit over shingles, or a specialty metal like copper.

Step 2: Once you approve the estimate, we handle the paperwork, including pulling permits from the City of Fillmore. We schedule the work and order materials. On installation day, our crew arrives early, protects your landscaping, and gets to work. For homes near downtown or with tight driveways, we plan material delivery carefully to avoid blocking neighbors. We also coordinate with any HOA requirements if applicable.

Step 3: After the job is done, we do a thorough cleanup, haul away all debris, and walk the property with you to make sure you are satisfied. We use a magnet to pick up any stray screws or nails, leaving your yard safe for kids and pets.

Pricing for metal roofing in Fillmore varies based on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you want to go over existing shingles, retrofit starts at $7 per square foot. Repairs, including leak fixes, start at $450, and screw replacement or re-fastening starts at $750. For a more accurate number, call us at (661) 495-2239 for a free estimate. We will assess your specific roof and give you a clear, written quote.

My house is near downtown Fillmore and has an older roof with some historic character. Can you match the look with metal?
Yes. We often work with homeowners in the historic district who want to maintain the architectural style. For example, we can install copper or standing seam in a color and profile that complements the neighborhood. We will also help you understand any design review requirements from the city.
A windstorm just lifted some panels on my roof in Fillmore. How quickly can you respond?
We prioritize storm damage calls. Call us at (661) 495-2239, and we will schedule an inspection as soon as possible, often within 24 to 48 hours. We can tarp or secure the area to prevent further damage and provide a repair estimate.
What is the typical cost to replace a shingle roof with metal on a 1,500-square-foot home in Fillmore?
For a basic corrugated panel roof, you might start around $5.50 per square foot, so roughly $8,250 for materials and labor. Standing seam would be higher, starting at $10 per square foot. The final price depends on roof pitch, access, and whether any structural repairs are needed.
Do I need a permit from the City of Fillmore to install a metal roof?
Yes, a roofing permit is typically required for a full replacement or new installation. The exact requirements and fees vary, so we recommend checking with the City of Fillmore Building Department. We can handle the permit application for you as part of our service.
My neighbor and I share a property line, and I am worried about drainage from my new metal roof. What should I do?
It is important to manage water runoff properly. We can design your gutter system to direct water away from the property line. If there is a dispute, we recommend talking with your neighbor and possibly getting a survey. We can also coordinate with your HOA if you have one.
Are you fully insured for roofing work in Fillmore?
Yes, we carry general liability insurance and workers' compensation coverage.
How often should I inspect my metal roof in Fillmore, and what should I look for?
We recommend an annual inspection, especially after winter rains and before the hot summer. Check for loose screws, debris in valleys, and any signs of rust or sealant wear. We offer free estimates for inspections and can perform maintenance like screw replacement and coating to extend the life of your roof.
Why choose us?

Trusted professionals in Santa Clarita

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Santa Clarita

All your work handled by qualified professionals in Santa Clarita

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

273+ Verified Client Reviews in Santa Clarita

⭐⭐⭐⭐⭐ 4.9/5 · 273 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Santa Clarita · Response within 24h · No commitment · ☎ (661) 495-2239

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Santa Clarita ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm