Serving the Santa Clarita area  ·  (661) 495-2239  ·  Open Mon-Sun 7am-7pm
📞 (661) 495-2239 Free Quote

Metal Roofing in Simi Valley, CA (93065) · Local Professionals

Santa Clarita Metal Roofing · Fast response in Simi Valley and the Santa Clarita area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+273Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Simi Valley is a city of ranch homes and tract houses tucked against the Santa Susana and Santa Monica Mountains, with a lot of 1960s to 1990s single-story and two-story builds on sunny hillsides. The housing stock here is mostly composition shingle and concrete tile, often original or one layer over, and the dry heat and Santa Ana winds take a toll on fasteners, flashing, and seams. If you live near the 118 freeway or off Tapo Canyon Road, you know how quickly a wind event can lift a panel or open a leak.

Homeowners in Simi Valley (93065) call Santa Clarita Metal Roofing because we understand this valley's specific mix of older ranch homes and newer tract properties. We have worked on roofs from Wood Ranch to the far end of Los Angeles Avenue, and we know what fails first in this climate: fastener back-out, dried-out sealant, and wind-lifted edges. Our team provides honest assessments and metal roofing solutions built for the heat, wind, and wildfire ember exposure that come with living in this part of Ventura County.

Metal Roofing in Simi Valley (93065)

Simi Valley's terrain is a big factor in how we approach every roof. Many homes sit on graded hillsides with tight side yards and steep driveways, which means staging materials and equipment takes planning. The soil is often decomposed granite and rock, so drainage around the foundation matters, and we pay attention to how water sheds off the roof and away from the house. Older ranch properties near the historic downtown have mature trees and varied rooflines, while newer tract homes in neighborhoods like Wood Ranch and the Sycamore area have consistent slopes and concrete tile that can hide underlying issues. We also see a lot of horse properties and larger lots on the city's edges, where corrugated panels and metal shingle roofs are common on barns, workshops, and shelters.

Our experience serving Simi Valley and the Santa Clarita area means we have seen how Santa Ana winds funnel through the valley and test every seam and fastener. We know that a metal roof here needs to handle intense UV, occasional winter downpours, and the ember threat from surrounding brush. Whether it is a standing seam install on a hillside home or a metal roof over shingles on a 1970s ranch, we bring the right approach for the local conditions.

Our services in Simi Valley

How a Job Works in Simi Valley

Step 1: It starts with a call to (661) 495-2239 or a request through our website. We schedule a free on-site assessment at your Simi Valley property, where we inspect the roof, attic if accessible, flashing, and drainage. We talk through your options, whether that is a repair, a retrofit over existing shingles, or a full replacement, and we give you a written estimate with clear pricing.

Step 2: Once you approve, we handle the work. In Simi Valley, that often means coordinating with the city's building department for permits, which are typically required for a full replacement or re-roof. We also know that some neighborhoods have HOA design review, so we help you choose panel profiles and colors that meet those rules. On tight hillside lots, we plan material delivery and staging carefully to avoid blocking neighbors or damaging landscaping. Our crew protects your property, removes the old roofing if needed, and installs the new metal roof system to manufacturer specs.

Step 3: After the work is done, we clean up thoroughly. We magnet-sweep for nails, remove all debris, and do a final walkthrough with you to make sure you are satisfied. We leave your property clean and your new roof ready for the next Santa Ana wind event.

Pricing for metal roofing in Simi Valley depends on the size and complexity of your roof, the material you choose, and the condition of the existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are considering a retrofit over existing shingles, that starts at $7 per square foot. Common repairs like leak fixes start at $450, and screw replacement or re-fastening starts at $750. For a more accurate number, call us at (661) 495-2239 for a free estimate. We will walk your roof, measure, and give you a clear, no-surprise quote.

My 1970s ranch home in Simi Valley has original composition shingles. Can you install a metal roof over them, and what are the pros and cons?
Yes, we can often install a metal roof over your existing shingles if your roof structure and local code allow it. This is a popular option for older Simi Valley ranch homes because it saves on tear-off costs and landfill fees. The main advantage is lower upfront cost and less disruption. The cons are that you add weight to the roof (though metal is relatively light) and you need to ensure the existing shingles are in good enough condition to serve as a substrate. We always inspect first and follow Simi Valley building department rules on the number of layers allowed.
A Santa Ana wind event just lifted some panels on my roof in Simi Valley. Can you help with emergency repairs?
Yes, we handle storm and wind damage repairs in Simi Valley. Call us at (661) 495-2239 and we will schedule a prompt inspection. We can secure loose panels, replace damaged fasteners, and make temporary repairs if needed to prevent further water intrusion. We also document the damage for insurance purposes if you are filing a claim.
What does a typical metal roof repair cost in Simi Valley?
Most repairs start around $450 for a leak repair or minor flashing fix. Screw replacement and re-fastening starts at $750. The final cost depends on the extent of the damage, roof access, and material. We give you a firm quote after inspecting the roof, so you know the price before we start.
Do I need a permit for a metal roof replacement in Simi Valley, and how does the process work?
In most cases, yes, a permit is required for a full roof replacement or re-roof in Simi Valley. The exact requirements and fees are set by the city's building department, so we always verify with them before starting. We handle the permit application and coordinate inspections as part of our service. If your home is in a historic district or HOA, there may be additional design review requirements, and we can help you navigate those.
My neighbor's tree branches hang over my roof in Simi Valley. Who is responsible for trimming, and can you help with HOA approval for a new roof color?
In California, you generally have the right to trim branches that extend over your property line, but it is best to talk with your neighbor first. For HOA approval, we can provide color samples and documentation to submit to your HOA board. We are familiar with many Simi Valley HOAs and can help you choose a metal roof color and profile that meets their guidelines.
Are you fully insured for roofing work in Simi Valley?
Yes, we are fully insured with both general liability and workers' compensation coverage. This protects you and your property in the unlikely event of an accident during the project.
How often should I inspect my metal roof in Simi Valley, and what maintenance does it need?
We recommend an inspection every year or after any major wind event. In Simi Valley's climate, the main things to check are fastener tightness, sealant condition around flashing and penetrations, and debris buildup in valleys and gutters. A yearly inspection can catch small issues before they become leaks. We offer free estimates for inspections and can perform any needed maintenance.
Why choose us?

Trusted professionals in Santa Clarita

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Santa Clarita

All your work handled by qualified professionals in Santa Clarita

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

273+ Verified Client Reviews in Santa Clarita

⭐⭐⭐⭐⭐ 4.9/5 · 273 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Santa Clarita · Response within 24h · No commitment · ☎ (661) 495-2239

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Santa Clarita ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm