Serving the Santa Clarita area  ·  (661) 495-2239  ·  Open Mon-Sun 7am-7pm
📞 (661) 495-2239 Free Quote

Metal Roofing in Stevenson Ranch, CA (91355) · Local Professionals

Santa Clarita Metal Roofing · Fast response in Stevenson Ranch and the Santa Clarita area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+273Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Stevenson Ranch is that stretch of the Santa Clarita Valley where the 1990s and 2000s two-story stucco homes sit on generous lots with big concrete tile roofs, just west of the I-5 and south of the 126. You know the look: Mediterranean elevations, tile everywhere, and a lot of those roofs now hitting the 20 to 30 year mark.

Homeowners in 91355 call Santa Clarita Metal Roofing because we know exactly what fails on these roofs and what works in this heat. Whether you are near Stevenson Ranch Park or up against the hills by Pico Canyon, we have probably worked on your street or one just like it.

Metal Roofing in Stevenson Ranch (91355)

Stevenson Ranch sits on a slope that runs from the valley floor up toward the Santa Susana Mountains, and that grade changes how a roof job goes. Lower streets near The Old Road drain fast, but properties higher up toward Southern Oaks and the hillside tracts deal with runoff that has to be managed, not just directed. The soil is decomposed granite and rock in a lot of yards, so anchoring and staging are different from what you see on flat valley lots. Add in tight HOA design rules (most of Stevenson Ranch is governed by an association), and you get a job where panel profile and color matter as much as the underlayment.

We have installed and repaired metal roofs across the Santa Clarita Valley for years, from Stevenson Ranch and Valencia to Saugus and Newhall. That means we have seen how stone-coated steel and standing seam hold up to the Santa Ana winds and the summer UV here, and we can tell you honestly what makes sense for your house instead of what looks good in a brochure.

Our services in Stevenson Ranch

How a Job Works in Stevenson Ranch

Step 1: You call (661) 495-2239 and we set up a free on-site assessment. We walk the roof, check the flashing, fasteners, and underlayment, and look at how your tile or shingle roof is actually performing. You get a written estimate with options, not a pressure pitch.

Step 2: Once you approve, we handle the HOA paperwork if your association requires it and pull the permit through the local building department (requirements vary, so we verify before we start). On Stevenson Ranch lots, access can be tight and some driveways are steep, so we plan staging and material delivery around your property, not the other way around.

Step 3: When the work is done, we clean up completely. Magnets for nails, debris hauled off, gutters checked. Then we walk the roof with you, show you what we did, and make sure you are satisfied before we leave.

Pricing in Stevenson Ranch depends on the size and pitch of your roof, access, whether we are going over existing material or doing a full tear-off, and how soon you need it done. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, metal roof replacement around $9, and stone-coated steel also around $9. A retrofit over existing shingles starts around $7. Repairs and leak fixes start around $450, screw replacement and re-fastening around $750, and flashing or chimney repair around $600. Coating and painting starts around $2.50 per square foot, and gutters run about $9 per linear foot. Every roof is different, so call (661) 495-2239 for a free estimate and we will give you real numbers for your house.

My Stevenson Ranch home has a concrete tile roof from the 1990s. Can you install stone-coated steel over it or do I need a full tear-off?
It depends on the condition of the tile and the underlayment, and on how many layers are already there. In many Stevenson Ranch homes, a retrofit over the existing tile is possible if the structure and decking check out, but we always inspect first. If the tile is cracked or the underlayment is shot, a tear-off is the safer call. We will tell you straight after a free inspection.
A Santa Ana wind event just peeled back some panels on my roof near Stevenson Ranch Park. How fast can you get out there?
We prioritize storm and wind damage calls in Stevenson Ranch and the surrounding area. Call (661) 495-2239 and we will schedule the soonest available inspection, usually within a day or two depending on volume. We can tarp or secure the area if there is an active leak risk while we wait on materials or your insurance decision.
What does a typical metal roof replacement cost for a two-story Stevenson Ranch home?
Most two-story homes here run between 2,000 and 3,500 square feet of roof area. At our starting rates, a full replacement with stone-coated steel or standing seam typically lands somewhere in the high teens to low thirties, depending on pitch, access, and whether we tear off the old roof. Call (661) 495-2239 for a free estimate tailored to your house.
Do I need a permit from the City of Santa Clarita for a metal roof in Stevenson Ranch, and does the HOA have to approve it?
Yes, a roofing permit is commonly required for a full replacement or re-roof, and the thresholds and inspection requirements vary by jurisdiction, so we verify with the local building department before starting. Stevenson Ranch is largely HOA-governed, and most associations require design review for panel profile and color. We can help you prepare the submittal so it moves through smoothly.
My neighbor's tree drops limbs on my roof and we are not sure where the property line is. How do you handle that?
We stay out of neighbor disputes, but we can show you exactly where the roof work stops and document the condition of your roof before we start. If a limb from a neighboring tree caused the damage, we note it in our report so you have a record for insurance or a conversation with your neighbor. For HOA issues, we coordinate with the association directly if you want us to.
Are you fully insured for work on my Stevenson Ranch property?
Yes. We carry general liability insurance and workers' compensation coverage.
What kind of maintenance does a metal roof need in Stevenson Ranch with this heat and wind?
Once a year, ideally in late spring before the summer heat, we recommend checking fasteners, seals around flashing and penetrations, and gutter flow. After a Santa Ana wind event, look for lifted panels or loose screws. We offer inspections and screw replacement starting around $750, and catching a small issue early is a lot cheaper than a leak repair.
Why choose us?

Trusted professionals in Santa Clarita

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Santa Clarita

All your work handled by qualified professionals in Santa Clarita

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

273+ Verified Client Reviews in Santa Clarita

⭐⭐⭐⭐⭐ 4.9/5 · 273 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Santa Clarita · Response within 24h · No commitment · ☎ (661) 495-2239

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Santa Clarita ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm